Editor’s Pick Best Rebar Bender On The Market Today

If you buy a rebar bender that wasn't made for you, there is no possible way to escape the guilt. Nobody likes to spend their hard-earned money on things that don't offer any worth to their lives. On the other hand, the manufacturers do market their rebar benders in a way that makes it attractive to spend on them.

While we can't speak for others, we are certain that we can assist you with purchasing the best rebar bender. Our main objective has been to disregard all the deceptive marketing and independently test these products. As a result, ensuring that each of them on our list is a worthy one for you.

The article also includes a buying guide at the end, which unquestionably simplifies the decision-making process. The better-personalized items will be easier to distinguish from the less-fitting ones. So let's get started without any further ado.

Best rebar bender – Top 25 Picks 2022

Bestseller No. 1
Metabo HPT Rebar Bender and Cutter | Electric | Up to #5 Grade 60 Rebar (3/8", 1/2", 5/8") | Variable Speed Trigger | Lightweight and Portable | 5-Year Warranty | VB16Y
  • Rebar bender and cutter
  • MOTOR: 8-Amp motor with intense power (530W)
  • TRIGGER: Variable speed trigger with safety lock provides manual-like precision and control over the bending speed
  • APPLICATIONS: Uniformly bends up to no. 5 (3/8", 1/2", 5/8") grade 60 rebar at a maximum angle of 180 degrees
  • FAST BENDS: Precision angle bends are preset and completed in just seconds (cut: 3. 1 seconds, bend: 5. 1 seconds) for consistency
Bestseller No. 2
Crescent H.K. Porter 3/8" (#3) and 1/2" (#4) Extendable Indexing Rebar Bender, RB4, Red/Black
  • Dual use head allows bending for both 3/8 Inch and 1/2 Inch rebar (No3 and No4)
  • Pushbutton extends bender to 35 Inch for maximum leverage; collapses to just 21 Inch for convenient storage and portability
  • 14 position indexing head adjusts with center pushbutton to allow total access for maximum leverage
  • Extra sturdy steel handles for the toughest conditions
  • Super strong indexing head grips rebar securely for accurate bends
Bestseller No. 3
BN Products MBC-16B 1 Manual Bender/Cutter, Orange
  • Longer handle and cam mechanism provides greater leverage when cutting and bending grade 60 rebar
  • Adjustable 2-1/2" diameter bending roller
  • Replaceable cutting jaws have two open slots with innovative shaped blades to prevent chipping of the jaws
  • Other features include a 12" long no-slip handle grip and a lifting chain to make it easier to carry
  • Other features include a 12" long no-slip handle grip and a lifting chain to make it easier to carry
Bestseller No. 4
VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V
  • 0 - 90 Degrees Excellent Performance: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' to 1" (6 to 25 mm) within 5 seconds. 1/4'' / 6 mm #2 Rebar(0-55°), 1'' / 25 mm #8 Rebar(0-90°). It is able to satisfy your various bending demands.
  • 1500W Pure Copper Coil Motor: This portable rebar bender features a 1500W pure copper coil motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bending machine's operating life to a large extent.
  • Sturdy Machine Body & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing.
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position.
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Bestseller No. 5
36" Rebar Bender #5 Grade 60 (5/8" Diameter) Capacity Light Duty Rebar Hickeys
  • Max Capacity: 5/8"
  • Overall length: 37-1/4"
  • Tip heads size: 4"x4"
Bestseller No. 6
Anbull 900W Electric Rebar Bender,Hydraulic Rebar Bending Maching Bending up to 5/8 Inch #5 16mm Rebar, Bending Angle 0-130 Degrees, Rebar Bending Machine with Positioning Bolt
  • 【No Metal Case】💪This rebar cutter is the same model as Anbull RB-16 rebar cutter, just without metal case.
  • 【Pure Copper Coil Motor】 Bending rebar up to 5/8”(#5)16mm from 0-130 degrees within seconds, which satisfies your various bending demand and raise your working efficiency greatly.
  • 【One Button Operation】 Ergonomic back grip design of our electric rebar bender facilitates maneuverability and ease of use and safety. Simply Keeping the switch pressed, the bending block starts to push forward.
  • 【Hydraulic-powered Piston】Our hydraulic rebar bender features strong thrust with less power consumption and low noise to extend the service life. When reach the angle you want, release the switch. Loosen the pressure release switch, the bending block will reset.
  • 【Detachable Positioning Bolt】 There is a detachable positioning bolt designed for starter, marking at the positioning bolt when bending for the first time at the positioning bolt, so that you could bend the rebar to the same angle next time.
Bestseller No. 7
Happybuy Rebar Bender 1 inch 25 mm Rebar Bending Bender Rebar Grade 60 Electric Rebar Bender Heavy Duty with Foot Pedal for Bending Steel Rope (1 inch Rebar Bender)
  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. Bending Angle: 0-180°, Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Item Dimensions(L x W x H): 17.72'' x 19.69 x 20.08'' / 45 x 50 x 51 cm.
  • 1700W Pure Copper Coil Motor: This hydraulic bending machine features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally.
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Bestseller No. 8
A30R Rebar Bender Manual Hand Operated to 5/8" bar Reverse Head
  • Manual rebar bender
  • tough steel construction
  • threaded pins to help hold rebar
  • 33" long, only weighs about 4 lbs
  • bends up to 5/8" rebar
Bestseller No. 9
Anbull 1200W Electric Rebar Bender,Hydraulic Rebar Bending Machine Bending up to 7/8 Inch #7 22mm Rebar, Rebar Bending Angle 90 Degrees or Greater
  • 【Powerful 1200W Pure Copper Motor】With the electric hydraulic-powered motor and piston, Anbull rebar bender makes each bend both fast and efficient , and it also features strong thrust with less power consumption and lower noise.
  • 【Great Bending and Straightening Capacity 】Anbull RB22 concrect rebar bender has powerfull push and pull capabilities which allows bending or straightening 7/8" 22mm rebar to 90° or greater within 5 seconds, satisfying your various manufacturing needs. (Note: The rebar straightening head is not included in the Rebar Bender and needs to be purchased separately. Please refer to ASIN: B097MHZYJP)
  • 【Three-point Bending】The electric rebar bending machine Designed with a piston that moves forward forming a three-point bending system for the rebar bending head, the bending can be made fast and efficient.
  • 【One Button Operation】With its compact and portable design, it can be easily carried by one person for effective on site construction, and it runs on the standard 110V outlet, perfect for all rebar projects both at workplace and on the job site.
  • 【Precision Quench Technology】 Equipped with a pressure relief valve to release the power after bending, our electric hydraulic rebar bender comes with a bending block quenched with precision steel casting technology.
Bestseller No. 10
Crescent H.K. Porter Rebar Cutter and Bender - 0590RBJN
  • Mounts easily on most flat surfaces
  • Cuts and bends
  • Shear-cut blades
  • Rugged contractor's tool
  • Shear-cut blades
Bestseller No. 12
Yisuosi-Ye 900W Electric Rebar Bender,Hydraulic Rebar Bending Maching ,5/8 Inch #5 16mm Portable Hydraulic Electric Rebar Steel Bender Bending Machine ,Bending Angle 0-130° With Positioning Bolt
  • 【Pure copper coil motor】Can bend 5/8"(#5) 16mm or less steel bars 0-130° in 5 seconds to meet your various bending needs and greatly improve work efficiency.
  • 【One-touch operation】Adopted the ergonomic back grip design, easy to operate and high safety. Just press the switch, the bending block will start to push.
  • 【Hydraulic power piston】With strong thrust, low power consumption, low noise, and extended service life. After the steel bending, you can pull the pressure relief valve to complete the pressure relief and the piston returns to the original position.
  • 【Safe and reliable, low noise】 Steel bending machine runs smoothly, it is driven by hydraulic pump, rolling bearing drive, making the operation safe and stable, the bending process without excess sparks and dust. Machine noise is low, the failure rate is low, which is helpful to work.
  • 【Widely used】 RB-16 automatic steel bending machine is widely used in construction projects for bending steel bars, steel bars, steel rods, etc.
Bestseller No. 13
California Concrete Tool CCTi Portable Rebar Bender - Electric Hydraulic Bend Up to #8 (1 inch) Rebar and Round Rebar (Model: RB-258N), Orange
  • Excellent performance: Bend up to #8 (1 inch) Grade 60 rebar and lower carbon round bar.
  • Durable body: Full aluminum body and high-strength machine head frame. Multiple screws fixed on the head to ensure sealing and stability.
  • Power motor: Feature 1500W power motor for high efficiency and low noise operation.
  • Ergonomic design: Handles are comfortable and easy to hold during operation and transportation.
  • Fast speed: Bends 1/4" to 1" (4 to 25mm) rebar from 0 to 90 degrees in just 5 seconds. *The bending speed depends on the thickness of the rebar and bending angle.
Bestseller No. 14
VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod
  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46.
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally.
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.
  • Easy to Operate & Transport: This heavy-duty rebar cutter bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Bestseller No. 15
Makita XCS04T1 18V LXT® Lithium-Ion Brushless Cordless Rebar Cutter Kit (5.0Ah)
  • Performs up to 233 cuts of #5 rebar with one 18V LXT 5. 0Ah battery
  • Cutting capacity range of 1/8"- 5/8"
  • Spark free cutting of rebar and steel rod
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
  • Fast and effortless cutting speed of #5 rebar in 2. 8 seconds
Bestseller No. 16
VEVOR Hydraulic Rebar Bender, 3000W Electric Rebar Bender, 0.24''-1.26''/6-32 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod
  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30.
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A).
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine.
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste.
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc.
Bestseller No. 17
Makita XRT01TK 18V LXT Lithium-Ion Brushless Cordless Rebar Tying Tool Kit (5.0Ah)
  • Up to 5, 300 ties of #3 x #3 diameter rebar using an 18V LXT 5.0Ah battery
  • Multiple bar tying capability; ties Up to two #5 diameter bars or four #4 diameter bars in under 1 second
  • 2-Mode operation provides single or continuous wire tie actuation for fast and efficient tying
  • Fast and seamless wire reel easy-load design with automatic locking mechanism built into Protective cover
  • The BL Brushless motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life.Wire Diameter (gauge):21
Bestseller No. 18
CCTI Electric Rebar Cutter Bender Combo Machine - Heavy Duty Cutting Bending Up to #8(1 inch/25 mm) Grade 60 Rebar(Model: RBC-258)
  • Business Address Only - 5-10 Days Freight Shipping to Lower 48 States (No Shipping to AK, HI, GU, PR)
  • Fast Speed 7 Seconds for 180 degree bend - Power 115V 50/60Hz -15 amps
  • Dimension: 18"W x 18"D x 36"H - Weight: 300Lb
  • Includes: Cutter, Bender, Stand, 2 Rollers, 2 Foot Pedal Switches and User Manual
  • Heavy-Duty, Cut and Bend Rebar up to #8 (1") Grade 60 at job sites
Bestseller No. 19
CCTi Portable Rebar Bender - Electric Hydraulic Bend Up to #5 5/8" Rebar and Round Bar(Model: RB-165A)
  • Portable and Compact only 33 LB Net.
  • Bend Up to #5 5/8"(16mm) Grade 60 Rebar and Low Carbon Round Bar
  • Fast Speed 5 Seconds 0-130 Degrees Bending
  • Power by 110V AC - 900W
  • Optional larger radius bending shoe and collar set recommended to minimize rebar breakage (sold separately)
Bestseller No. 20
INTBUYING Electric Pipe Tube Bender Steel Rebar Tube Bender Machine 2.2KW Square Round Pipe Bending Machine Multi-Function Pipe Bender Rolling Machine with 15 Round and 9 Square Die Sets 220V
  • ✔【Powerful Motor】Our Pipe tube bender comes with Power 220V/50HZ/2200W,Pure copper core motor, with smooth operation, low noise, low energy consumption, which can work for a long time without heating, and has a long service life.
  • ✔【High-Accuracy Die Sets】The machine comes with 15 round tube dies and 9 square tube dies, which are made of steel, hard and durable. Bending tube wall thickness is 0-2mm(0-0.079"),Circular tube die specifications: 19/22-63/25-51/32-38/76mm,Square tube die specifications: 20-60/25-50/30-40mm.The size of die can be customized.
  • ✔【High Precision】High precision ball bearing with smooth operation, tube bending process will not be stuck, bearing base is also strengthened, makes the machine very stable during operation.
  • ✔【Features】The chain is wide and thick, strong and durable. Reducer can withstand overload capacity, No noise and can work in harsh environment. Motor with positive and negative switch, power cord long enough to keep a safe distance from the machine, it is easy to operate, improve processing efficiency.
  • ✔【Wide Application】This Electric Pipe Bender is used for bending thin-wall circular, square and rectangular tubes made by stainless steel or other nonferrous metals to any radian. Widely applied in industries including construction and decoration. But not suitable for aluminum alloy material..

Things to Care about Before Picking a rebar bender

When you go to buy a rebar bender, you will come in contact with many options available in the market. You can be confused about which rebar bender will be better for you. To make your task easier, we are going to discuss buying guides in this section.

Pricing

Pricing is an important factor in the decision of buying a rebar bender. As the performance, design, and brand value are not the same for all the rebar benders, the pricing isn't also the same. Specifically, improved design and performance will demand high pricing of a rebar bender.

The quality of a renowned company/ manufacturer has a brand value. They provide premium quality rebar benders but at a high cost. So, you have to decide if you can afford that high cost or not. Otherwise, you have to sacrifice the expectations of high-quality rebar benders.

Some manufacturers offer rebar benders with an installment payment method. So that, you can pick a rebar bender of good quality and can pay slowly. Also, you can look for the discount or sale session of the particular product.

Hands-On Experience

Hands-on experience is important to judge the real-life usability of a rebar bender. Likewise, it’s also the best way to judge if it suits your need truly or not.

Often manufacturers will only show the good sides of a rebar bender. Through people’s hands-on experience, you can easily get to know the cons of a rebar bender, and if it’s lacking what you need.

Functionality

The functionality of a rebar bender refers to the purpose of the product and how it works. This assures the ability to perform the job that the rebar bender is intended to do.

The functionality checking of a rebar bender is the index of testing if it is performing well or not. Design specifications may vary from product to product. As a result, functionality will also differ. So, before buying a rebar bender, be sure about the design specification and its functionality.

Ease of Use

Outstanding ease of use will drastically decrease the number of resources required. That's why you should choose a less complex rebar bender. It ensures that it will be easier to deal with. That means you will be able to learn how to use it very quickly.

You may prefer a rebar bender that has a great design. However, if the design is much more complex, it will be challenging to understand and will also be time-killing. So, don't end up wasting your time and energy on needlessly complicated designed rebar benders.

Replicas

Close copies of a real product are known as a replica. Sometimes, the prices of real rebar benders are so high that many customers can't even reach those. Whereas replicas come at a cheaper rate.

But, you should have enough skill to identify between the real and replica rebar bender. Otherwise, you might end up buying the replica product at the price of a real one.

FAQs

After the lengthy discussion, we are attaching a FAQs section here. Here, you will come to know about some mostly asked questions about rebar bender.

Does Every Manufacturer of rebar bender Offer a Free Trial?

No. Some of the manufacturers will offer you a free trial, some others won't. You should look for products where the free trial is available. So that, you can have an idea about how the rebar bender works before paying for it.

After the trial period, make sure nothing can force you to purchase that rebar bender if you don't like it.

What Will Happen If I Buy A Replica of rebar bender?

Though the quality of replicas won't be as premium as the real one, it has quite decent quality. Moreover, it comes at a cheaper rate. So, buying replicas at a lower price and getting efficiency close to the real one is undoubtedly a great choice.

Just make sure that you don't buy a replica product at the price of a real one.

Is Buying a rebar bender Worth It?

First, you need to think about why you want to buy the rebar bender. If the rebar bender fits your requirements, is easy to use, and saves your time, then obviously it is worth it. When a rebar bender makes your life easier and also within your budget, it's always worth purchasing.

Conclusion

With that, I present you the best rebar bender in the entire market. Not everyone uses their purchase that same way. Thus to understand if something fits your needs, do consider the environment you’ll be using them in.

Moreover, do proper research on the items, and follow our buying guide, and we can promise you’ll be left satisfied. So thank you for tagging along, and hope you find what you’re looking for!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *