Editor’s Pick Best Hakko Chp 170 : Reviews & Comparison

Choosing the best hakko chp 170 is also tricky as you might not know all the necessary factors about the product. We wanted to give you a comprehensive buying guide along with the answers to your commonly asked questions. This guide will make you aware of crucial factors about the hakko chp 170 and help you choose the right one for your needs.

Check the buying guide thoroughly before you narrow your choice down. And make sure you get a perfect hakko chp 170 that provides the best value for your hard-earned money. Let’s get into more details about the best hakko chp 170 to make a worthy buying decision.

Best hakko chp 170 – Top 25 Picks 2022

Bestseller No. 1
Hakko-CHP-170 Micro Cutter - Red
  • Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire
  • 21-degree
  • 2.5mm heat-treated carbon steel construction provides durability and long life
  • Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
  • Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance
Bestseller No. 2
Hakko Chp170 Bulk Pack 10 pack Micro Cutter, Clean Cut, 16 AWG
  • Authentic Cutters are Made in Italy (Printed on cutter handle)
Bestseller No. 3
Hakko CHP Micro Cutter, Clean Cut, 16 AWG (set of 5)
  • Cut: flush
  • Max cut: 16 wag
  • Rockwell hardness (arch) 56
  • Ergonomic handle for comfort
SaleBestseller No. 4
Hakko CHP Micro Cutter, Clean Cut, 16 AWG (2 pack Original Version)
  • Pack of 2 Micro Cutters
  • Authentic CHP product, by Hakko USA
  • Steel Type: 2.5 mm, Rockwell Hardness (RHC): 56
  • Cut Type: Flush
  • Max cut: 16 AWG, Note: Max cut is determined with copper wire.
Bestseller No. 5
Hakko-CHP-170 Micro Cutter - Red & NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length
  • Product 1: Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire
  • Product 1: 21-degree
  • Product 1: 2.5mm heat-treated carbon steel construction provides durability and long life
  • Product 1: Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
  • Product 2: Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
Bestseller No. 6
Hakko-CHP-170 Micro Cutter - Red & Irwin Vise-Grip Wire Stripping Tool/Wire Cutter, 8-Inch (2078309)
  • Product 1: Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire
  • Product 1: 21-degree
  • Product 1: 2.5mm heat-treated carbon steel construction provides durability and long life
  • Product 1: Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
  • Product 2: Wire cutter with induction hardened cutting edge stays sharp longer
Bestseller No. 7
Bestseller No. 8
Hakko FA400-04 Bench Top ESD-Safe Smoke Absorber, 1-(Pack) & Hakko-CHP-170 Micro Cutter - Red
  • Product 1: Can be operated standing up or laying down in a low-profile position
  • Product 1: Low profile position provides approximately 2-1/2 times the airflow and efficiency
  • Product 1: ESD-safe by design and is made of ESD-safe materials
  • Product 1: Activated Carbon filter contains over 8g of highly activated carbon
  • Product 2: Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire
Bestseller No. 9
Hakko FX888D-23BY Digital Soldering Station with CHP-170 Micro Cutter
  • Digital calibration
  • Low temperature alarm
  • Adjustable temperature control, range: 120° - 899°F (50° - 480°C) and Maintains idle temperature within 1.8°F
  • Digital display shows °F or °C
  • Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal recovery
Bestseller No. 11
Micro Cutter (Update Version)
  • Cut Type: Flush
  • Dolphin-style grips are slim and lightweight to reduce stress on operator's hands.
  • Max cut: 16 AWG. Note: Max cut is determined with copper wire.
  • Authentic Cutters are Made in Italy (Printed on cutter handle)
  • Authentic CHP Product by Hakko
Bestseller No. 12
Micro Cutter, 5 Pack
  • Authentic Hakko CHP-170 Micro Cutters - Pack of (5) Cutters
  • Max cutting diameter of 16AWG - Note: Max cut is determined with copper wire.
  • Designed for cutting soft alloy wire
  • Flush cut head with the cutting tip bent at 21 degrees for cutting accuracy
  • Rockwell Hardness (RHC): 56, Steel: 2.5 mm
Bestseller No. 13
Hakko Micro Soft Wire Cutter, 1.5mm Stand-off, Flush Cut, 2.5mm Hardened Carbon Steel Construction, 21-Degree Angled Jaw, 8mm Jaw Length, 16 Gauge Maximum Cutting Capacity (3-Pack)
  • Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire
  • 21-degree reverse angled cutting surface enables terminal wires to be cut, leaving a 1.5mm stand-off
  • Drake Off Road Tools 2.5mm heat-treated carbon steel construction provides durability and long life
  • Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
  • Dolphin-style nonslip hand grips with curved fore-edge provide comfort and control, and Parkerized surfaces prevent glare and increase corrosion resistance
SaleBestseller No. 14
Hakko CHP TR-20-50-M Soft Wire Micro Cutter, Flush-cut, 2.0mm Hardened Carbon Steel Construction, 48-Degree Angled Jaw, 8mm Jaw Length, 22 Maximum Gauge Cutting Capacity
  • Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 22 gauge (0.6mm) copper and soft wire
  • 48-degree angled cutting surface eases access to board for flush-cutting soft wire in component-dense areas
  • 2.0mm heat-treated carbon steel construction provides durability and long life
  • Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
  • Dolphin-style nonslip hand grips provide comfort and control, curved fore-edge protects hands from cutting surfaces, and Parkerized surfaces prevent glare and increase corrosion resistance
Bestseller No. 15
Hakko CHP TR-20-M Micro Soft Wire Cutter, Flush-cut, 2.0mm Hardened Carbon Steel Construction, 21-Degree Angled Jaw, 8mm Jaw Length, 20 Gauge Maximum Cutting Capacity
  • Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 20 gauge (0.8mm) copper and soft wire
  • 21-degree angled cutting surface eases access to board for flush-cutting soft wire in component-dense areas
  • 2.0mm heat-treated carbon steel construction provides durability and long life
  • Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
  • Dolphin-style nonslip hand grips provide comfort and control, curved fore-edge protects hands from cutting surfaces, and Parkerized surfaces prevent glare and increase corrosion resistance
Bestseller No. 16
Hakko FA430-KIT1 Smoke Absorber with C1571
  • SMOKE ABSORBER, w/C1571, FA-430
  • FA430-KIT1 Smoke Absorber with C1571
  • Powerful suction
  • Quiet operation
  • 3-airflow adjustment modes: High, Medium, Low
Bestseller No. 17
Bestseller No. 18
Hakko CHP TR-58-R Medium Soft and Ferrous Wire Cutter, Flush Cut, 3.0mm Hardened Carbon Steel Construction, HRC 58, 21-Degree Angled Jaw, 8mm Jaw Length, 12 Gauge Maximum Cutting Capacity
  • Flush-cut medium soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 12 gauge (2mm) copper and soft wire, and ferrous materials
  • 21-degree angled cutting surface eases access to board for cutting soft wire in component-dense areas
  • HRC 58-rated 3.0mm heat-treated carbon steel construction provides durability and long life
  • Precision-ground holes and surfaces provide smooth movement, and spring returns tool to open position to reduce operator fatigue
  • Dolphin-style nonslip hand grips provide comfort and control, curved fore-edge protects hands from cutting surfaces, and Parkerized surfaces prevent glare and increase corrosion resistance
Bestseller No. 19
Hakko CHP PN-2002 General Purpose Short-Nose Pliers, Pointed Nose, Smooth Jaws, 20mm Jaw Length, 1.2mm Nose Width, 3mm Thick Steel
  • Short pointed-nose pliers with 1.2mm width for general purpose electronics applications
  • 20mm smooth jaw with precision-ground surfaces provides smooth operation
  • Flat outside edge eases access to recessed or component-dense areas
  • Dolphin-style nonslip hand grips provide comfort and control, and curved fore-edge protects hands from cutting surfaces
  • 3mm heat-treated carbon steel construction provides durability and long life, and Parkerized surfaces prevent glare and increase corrosion resistance
SaleBestseller No. 20
HongWay 5pcs Micro Flush Cutters, Wire Cutter with Internal Spring, Diagonal Cutters for Electronics, Heating Wire, Model Sprue, Soft Copper Wire Snips, 5 inches, Yellow
  • Economical diagonal cutter - 5pcs 170 Shear Cutter, yellow, 5 inches, made from high-hardness carbon steel, 10mm long jaws can be cut up to 18 AWG copper wire (0.04 "/ 1mm).
  • Thin blade profile - Industrial-grade manufacturing standard, fine workmanship. The cutting edge is treated with high frequency, the surface is polished, with repeated grinding, and the cutting is sharp.
  • Spring-back action - Lightweight spring design, easy to open and engage, to reduce workload and effectively prevent long-term work fatigue.
  • Ergonomic handle design - Ergonomically designed non-slip rubber handle for a comfortable grip.
  • Application - Can be used for cutting electronic component pins for trimming in tight areas, as well as cutting soft copper wire, soft iron wire, injection gate flashing, heating wire, etc. It can also be used for manual DIY, jewelry processing, model cutting and fishing. Please do not use the cutting pliers to cut objects beyond its cutting capacity, like hard metal, otherwise the cutting edge might be broken and cause irrecoverable gaps.

Things to Care about Before Picking a hakko chp 170

When you go to buy a hakko chp 170, you will come in contact with many options available in the market. You can be confused about which hakko chp 170 will be better for you. To make your task easier, we are going to discuss buying guides in this section.

Pricing

Pricing is an important factor in the decision of buying a hakko chp 170. As the performance, design, and brand value are not the same for all the hakko chp 170s, the pricing isn't also the same. Specifically, improved design and performance will demand high pricing of a hakko chp 170.

The quality of a renowned company/ manufacturer has a brand value. They provide premium quality hakko chp 170s but at a high cost. So, you have to decide if you can afford that high cost or not. Otherwise, you have to sacrifice the expectations of high-quality hakko chp 170s.

Some manufacturers offer hakko chp 170s with an installment payment method. So that, you can pick a hakko chp 170 of good quality and can pay slowly. Also, you can look for the discount or sale session of the particular product.

Hands-On Experience

Hands-on experience is important to judge the real-life usability of a hakko chp 170. Likewise, it’s also the best way to judge if it suits your need truly or not.

Often manufacturers will only show the good sides of a hakko chp 170. Through people’s hands-on experience, you can easily get to know the cons of a hakko chp 170, and if it’s lacking what you need.

Functionality

The functionality of a hakko chp 170 refers to the purpose of the product and how it works. This assures the ability to perform the job that the hakko chp 170 is intended to do.

The functionality checking of a hakko chp 170 is the index of testing if it is performing well or not. Design specifications may vary from product to product. As a result, functionality will also differ. So, before buying a hakko chp 170, be sure about the design specification and its functionality.

Ease of Use

Outstanding ease of use will drastically decrease the number of resources required. That's why you should choose a less complex hakko chp 170. It ensures that it will be easier to deal with. That means you will be able to learn how to use it very quickly.

You may prefer a hakko chp 170 that has a great design. However, if the design is much more complex, it will be challenging to understand and will also be time-killing. So, don't end up wasting your time and energy on needlessly complicated designed hakko chp 170s.

Replicas

Close copies of a real product are known as a replica. Sometimes, the prices of real hakko chp 170s are so high that many customers can't even reach those. Whereas replicas come at a cheaper rate.

But, you should have enough skill to identify between the real and replica hakko chp 170. Otherwise, you might end up buying the replica product at the price of a real one.

FAQs

After the lengthy discussion, we are attaching a FAQs section here. Here, you will come to know about some mostly asked questions about hakko chp 170.

Does Every Manufacturer of hakko chp 170 Offer a Free Trial?

No. Some of the manufacturers will offer you a free trial, some others won't. You should look for products where the free trial is available. So that, you can have an idea about how the hakko chp 170 works before paying for it.

After the trial period, make sure nothing can force you to purchase that hakko chp 170 if you don't like it.

What Will Happen If I Buy A Replica of hakko chp 170?

Though the quality of replicas won't be as premium as the real one, it has quite decent quality. Moreover, it comes at a cheaper rate. So, buying replicas at a lower price and getting efficiency close to the real one is undoubtedly a great choice.

Just make sure that you don't buy a replica product at the price of a real one.

Is Buying a hakko chp 170 Worth It?

First, you need to think about why you want to buy the hakko chp 170. If the hakko chp 170 fits your requirements, is easy to use, and saves your time, then obviously it is worth it. When a hakko chp 170 makes your life easier and also within your budget, it's always worth purchasing.

Conclusion

At long last, we have the definitive guide of best hakko chp 170. If you have read this far, then you are very close to being ready to make a purchase of the hakko chp 170.

In a nutshell, we are able to say that these hakko chp 170s are a fantastic investment that offers outstanding value for the money spent. If you are still unsure about anything, you should refer to the buying guide in order to obtain the most comprehensive information possible regarding the products.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *