Get The Best Argb Case Fans On The Market Today

Have you recently run into problems while purchasing something that wasn't what you expected? We know the frequency of it happening is common.

Moreover, if you’re in the market for the best argb case fans, it gets even worse. But what if we have everything to tell you about the argb case fans so that you should face it in the future?

To help you out, we've done a ton of research on a wide range of items and compiled it all here. In comparison to others, these are among the best available in the market. We're confident that you won't be sorry after you went with these products.

Read on to find out why these items might be the best option for you, and keep reading if you still have questions. Since we also supply the purchasing information. Get some coffee and relax.

Top 12 Best argb case fans Picks in 2022

Bestseller No. 1
ARCTIC P12 PWM PST A-RGB - 120 mm PWM case fan optimized for static pressure, case fan, semi-passive: 0-2000 RPM, 5V 3 pin ARGB LED, single fan - Black
  • DIGITAL A-RGB: The 12 A-RGB LEDs placed along the fan hub and the transparent rotor, with its enclosed design, provide even and rich illumination
  • EASY TO COMBINE: Both the fan and A-RGB cables have an integrated Y-splitter, making it even easier to retrofit and control additional fans
  • OPTIMIZED FOR STATIC PRESSURE: Thanks to its high static pressure, the fan guarantees efficient cooling, even with increased air resistance. Suitable for use on heat sinks & radiators
  • 0-2000 RPM: The speed of the fan can be throttled to a standstill via PWM. This allows for silent operation in IDLE while guaranteeing the highest performance when needed
  • SPECIFICATIONS: Fan speed: 0-2000 rpm; Airflow: 48.8 CFM/82.91 m³/h; Static pressure: 1.85 mmH2O; Noise level: 0.3 Sone; Fan connector: 4-pin; LED connector: 3-pin
Bestseller No. 2
upHere 120mm Case Fan,Support 5V ARGB Addressable Motherboard SYNC/Remote Control, Colorful Cooler Speed Adjustable with Fan Control Hub for PC Cases, CPU Coolers,Radiators System,6-Pack,SR12-06-6
  • 1.RC & 5V ARGB SYNC: Built with the advanced ARGB lighting system,support 5V 3PIN ARGB motherboard synchronization,also support remote control.Multiple rgb modes can be switched,makes your computer case colorful.
  • 02.Unlimited color transformation, One key to change RGB color.Enjoy the beautiful RGB effect and nice heat dissipation effect by upHere SR12-06 RGB case fans, bring you cool gaming experience.
  • 03.Long Service Life:Wear resistant hydraulic bearing construction makes the fan run noiseless and the air aolume larger with an astounding service life of more than 40,000 hours.
  • 04.Fan Blades Design:The 9 blades are designed for high-volume air delivery while keeping noise to a minimum level.
  • 05.What You Get: SR12-06 Wireless RGB Case Fan, our worry-free 12-month warranty and friendly customer service.
Bestseller No. 3
ARCTIC P12 PWM PST A-RGB (3 Pack) - 120 mm PWM case Fan Optimized for Static Pressure, case Fan, semi-Passive: 0-2000 RPM, 5V 3 pin ARGB LED, Single Fan - Black
  • DIGITAL A-RGB: The 12 A-RGB LEDs placed along the fan hub and the transparent rotor, with its enclosed design, provide even and rich illumination
  • EASY TO COMBINE: Both the fan and A-RGB cables have an integrated Y-splitter, making it even easier to retrofit and control additional fans
  • OPTIMIZED FOR STATIC PRESSURE: Thanks to its high static pressure, the fan guarantees efficient cooling, even with increased air resistance. Suitable for use on heat sinks & radiators
  • 0-2000 RPM: The speed of the fan can be throttled to a standstill via PWM. This allows for silent operation in IDLE while guaranteeing the highest performance when needed
  • SPECIFICATIONS: 3 Pack; Fan speed: 0-2000 rpm; Airflow: 48.8 CFM/82.91 m³/h; Static pressure: 1.85 mmH2O; Noise level: 0.3 Sone; Fan connector: 4-pin; LED connector: 3-pin
SaleBestseller No. 4
Cooler Master SickleFlow 120 V2 ARGB 3in1 Square Frame Fan, ARGB 3-Pin Customizable LEDS, Air Balance Curve Blade, Sealed Bearing, 120mm PWM Control for Computer Case & Liquid Radiator
  • ARGB Lighting: Signature cooling performance with an ARGB design: a perfect choice for all of the users wanting lighting effects that are individually customizable.
  • New Blade Design: Revised curve blade design to improve airflow and air pressure. A refreshed blade for improved lighting.
  • Enhanced Fan Frame: Enhanced frame structure, reducing turbulent flow noise increase efficiency.
  • Sealed Bearing Structure: Sealed and secured fan bearing, preventing dust and lubricating oil leakage while increasing the fan’s operation stability and life span.
SaleBestseller No. 5
ASUS TUF Gaming TF120 ARGB Chassis Fan 3-Pin Customizable LEDs Blade, Advanced Fluid Dynamic Bearing, 120mm PWM Control, Anti-vibration Pads, Double-layer LED Array for Computer Case & Liquid Radiator
  • Class-leading airflow, and low noise levels
  • Advanced fluid dynamic bearing provides up to 250,000 hours of operation.
  • PWM control: ultra-wide RPM range allows optimal cooling for all types of workloads.
  • Anti-vibration pads reduce fan noise by damping rattling and vibration.
  • A double-layer LED array produces deeper color saturation and more lighting effects than conventional RGB fans.
SaleBestseller No. 6
Cooler Master MasterFan MF120 Halo 3in1 Duo-Ring ARGB 3-Pin Fan, 24 Independently LEDS, 120mm PWM Static Pressure Fan, Absorbing Pads for Computer Case & Liquid Radiator
  • Duo-Ring Addressable RGB Lighting 24 Individually Controlled ARGB LEDs for a stunning visual effect
  • Performance Engineered Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator, low-noise or mesh chassis ventilation while boosting overall airflow
  • Silent Cooling Technology Noise Reduction Technology and Sound Absorbing Materials for a quieter and longer lifespan cooling solution
  • PWM Fan Controly, Dynamic speed adjustment between 650 rpm to 1 800 rpm minimizing noise or maximizing air flow
  • Certified Compatibility Compatible with most of Addressable RGB capable motherboards Aura Mystic Light and Polychome Sync
Bestseller No. 7
SNOWFAN Addressable 120mm RGB Case Fans,Gaming Computer PC Case Fans,5V 3Pin ARGB Fans Cooling SYNC,Premium Quiet 12V 4Pin PWM Long Life PC Fan(Single WY-12025-01) (White)
  • Addressable RGB LED Lighting:SNOWFAN ARGB Case Fan offers numerous possibilities to uniquely stage Your Case.The Addressable RGB LED lighting is Integrated in the fans PCB, it casts light on the impeller and outer frame, and emits fashionable light outward
  • Airflow-optimized fan blades&Enhanced Fan Frame:With a new angle of incidence of the fan blades, the rotor has been optimized for low speed in order to achieve a significantly higher volume flow, total pressure and exit speed at the same speed compared to other fans.SNOWFAN RGB PC Fan Let it works perfectly with the Enhanced frame structure made the air turbulence on the impeller and the turbulent flow noise is greatly reduced to ensure even quieter operation at full speed.
  • De-vibration pads:The excellent anti-vibration properties of the de-vibration pads reduce the often annoying noises that are transmitted to the housing by the vibrations of the case fan.
  • PWM &ARGB Motherboard Sync:The ARGB Computer Gaming PC Fan supports speed control using the PWM signal from the mainboard by 4pin PWM power suppler connector. 5V 3-Pin (4pin with 3rd pin blocked) ARGB Motherboard Sync with all mobo houseds including Gigabytes, Asus and MSI,NOT Work with 4-pin RGB or RGB+12V
  • No Risk to Purchase: Any quality issue with your case fans, please feel free to contact us and let us know. We will try our best to help you! SNOWFAN not only glade to bring the best customer service!
Bestseller No. 8
Vetroo 3 Pack 120mm ARGB & PWM Case Fans with Controller High Airflow Addressable RGB Motherboard Sync Computer PC Cooling Fans
  • ARGB Motherboard Sync: The RGB lighting can be synchronized with the 5V addressable motherboard and can be easily installed by connecting the standard 5V 3PIN RGB header to the Motherboard ARGB header, It allows you to choose your preferred rgb lighting anytime.
  • PWM Smart Control: It can automatically adjust the fan speed according to the temperature of the chassis, energy saving and environmental protection.
  • Low Noise Operation: 8 vibration rubber pads and PWM speed adjust provides an excellent silent experience and great airflow.(Max. Airflow: 48.1 CFM, Fan Noise: 26dBA)
  • Controller and Remote Included: Customize RGB lighting and effects, adjust fan speed, create vivid, dynamic lighting and speed synchronized with the rest of your system.
  • High-Performance Airflow: The fan operate between 800-1300 RPM, provide the better airflow and cooling for you case.
SaleBestseller No. 9
ID-COOLING NO-9215-XT ARGB Case Fan 15mm Thickness PWM Fan 5V 3 PIN Addressable RGB Fan Slim Fan for Radiator/CPU Cooler/Computer Case
  • 【PWM fan】The PWM fan control allows for dynamic speed adjustment between 800 rpm to 2, 500 rpm, minimizing noise or maximizing airflow. Max. Air Flow: 44.3CFM; Noise: 14~33.4dB(A)
  • 【RGB Sync】The Addressable RGB lighting can sync with the motherboard with a 5V 3PIN connector
  • 【Compatibility】The standard 92X92X15mm cooling fan is designed to match the CPU cooler, CPU water cooler, pc case, etc.
  • 【15mm thickness】The RGB case fan is ideal for low-profile CPU coolers, HTPCs, ITX builds, space-restricted applications with 15mm thickness to save more space
  • 【Superior Build Quality】High quality fan blades and frame built-in extremely even light diffuser. The fan Blade engineered for Low-Noise operation without sacrificing performance
Bestseller No. 10
Corsair 4000D Airflow Tempered Glass Mid-Tower ATX PC Case - White
  • Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC.
  • The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables.
  • Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling.
  • A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof (dependent on RAM height).
  • Put modern connections within easy reach with a front I/O panel including a USB 3.1 Type-C Port, USB 3.0 port, and a combination audio/microphone jack.
Bestseller No. 11
Raidmax EVOL H07 ATX Mid Tower Gaming Case Tempered Glass Side ARGB Fans Included (H07 Black)
  • -Mesh front panel with hidden look ARGB fans: Both the mesh and transparent front panel with hidden fan look for maximized airflow and offering a crystal-clear view of the ARGB Fan. When fan is turned off, you will have a clean sleek look of the case. When fan is on, you'll notice the beautiful rings in the front of the case.
  • x2 ARGB Fans: x2 addressable RGB fans at front and x1 Black rear Fan are included in the H07 case, capable of operating quietly while moving high volumes of air with ARGB lighting effects.
  • -ARGB Lighting System: The pre-installed ARGB controller can be managed by the reset switch on I/O panel or Motherboard to create a comprehensive ARGB lighting system.
  • -Tempered Glass Side Panel: Flex your gaming hardware, custom-loop cooling, anything you put inside your case is shown in a panoramic view through an edge-to-edge tempered glass
  • -Optimized Airflow with Magnetic Dust Filter: Filtered ventilation on the top panel provides additional thermal support while also offering mounting options for future cooling upgrades with magnetic dust filter included.
Bestseller No. 12
AsiaHorse Rocket-X Music RGB Fan,120mm PC Case Fan,5V 3-pin ARGB Header Motherboard Aura SYNC with Hub and Remote -Black 5pack
  • 1.【Dynamic lighting experience】Three modes that can change the effect of light according to the music,Make you have an immersive game effect
  • 2.【Synchronizable RGB via Motherboard】It allows you to control fan lighting with 5V addressable RGB motherboards. Compatible with motherboard software includes US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync, etc.
  • 3.【Latest frame design】The leading in design of air turbine maximizes the air intake at the same speed .
  • 4.【supports water cooling system】The radiator has disturbance and noise reduction design function, supports water cooling system, high flow rate and large capacity cooling tuning of 120 mm fan.
  • 5.【No Risk to Purchase】Any quality issue with your fans, please contact us in any tiems and let us know. We will try our best to help you!
Bestseller No. 13
ASIAHORSE FS-9002 Pro 20+6LED(in and Outside Light efect) ARGB Black 120mm Pwm Case Fan with 5V PWM Motherboard Sync/Analog Controller (5 Pack)
  • 【Vibrant Lighting Effects】Double addressable RGB loops designed for richer combinations of light effects. 26 ARGB LEDs spread in two loops give user superior visual effects.
  • 【Quiet Operation】FS9002 PRO uses hydraulic bearing to significantly reduces noise level; the maximum noise level is 24dBA. Each fan has 8 rubber pads to provide minimum vibration.
  • 【Two ARGB Control Methods】5V 3Pin RGB connector supports motherboard softwares synchronization. For users don't have ARGB header on their motherboard package come with an easy-use remote to control light effects and fan speed.
  • 【Efficient Cooling Performance】Motherboard can read fan speed by 4pin PWM connector and use the BIOS to reduce and increase fan speed according to the case temperature to avoid lag or freezes. The fan can also automatically adjust the speed without connecting to PWM.
  • 【Risk Free Procurement】we focus on the raw materials quality management, plug compatibility, conductor conductivity, wire flexibility and service life,in order to providing every customer with the best products . If you are not satisfied with our products for any reason, please send us an email and let us know. We will reply to you as soon as possible.

Buying Guide For the Best argb case fans

Getting overwhelmed with information is obvious for any beginner user of argb case fans. Nevertheless, this is why we always include a buying guide. It simply helps you organize your thoughts and come to a conclusion. Here are the factors to always keep in mind;

Budgeting

If you are here trying to buy a argb case fans without a budget, you are only making yourself more confused. The first step in buying the best one for you is to set up a budget. The best ones don’t always have to be expensive but rather a well fit for you.

Therefore, set up a budget by yourself that you are going to spend here. Otherwise, you will be stuck with plenty of options in hand that are offering additional functionalities. Correspondingly, end up buying the expensive one that comes with a lot of features. Later on, remains unused as it is not required in your regular life.

Best Seller

Having the best seller tag is something to be aware of. What it means is that the item has been bought by most of the customers in this subcategory. Therefore, you can trust the item without a second thought in hand.

You will be relieved to know that the known marketplaces are trusted enough and one cannot buy off the badge. Additionally, it is also out of the retailers’ hands to buy off all these sales numbers.

Don’t worry, the badge will not be difficult to find. It will be located right under the product’s title which is the first place your eyes will go.

Release Date

It’s always a smart idea to aim for the latest version available. Due to obvious reasons, the latest options will be able to provide you with much better functionalities within the same price range. As they say, new is always better.

So let’s say that you have come across two options that you liked and are confused about which one to pick. Simply find out the one with the latest feature and design. However, the latest release might not always mean the best. Thus also look for the essential requirements that wish to seek in your purchase.

Technical Support

There’s a chance that you will run into technical difficulties with this argb case fans. Hiring someone can get expensive that could have been fixed by yourself. This is where the manufacturer's technical support comes in handy. You will receive all the help to set it up perfectly as you have imagined.

Therefore, if you have no prior experience in this field then do seek this support system. Moreover, a well-branded manufacturer is also preferred as their support protocol is more convenient than others.

Warranty

Last but not the least, a warranty is undoubtedly relieving to have. Always check out for warranty when you are buying any product online. Some products do reach the hands of a customer without being checked. As a result, suffers from a defective argb case fans that is not replaceable.

With that warranty in hand, you will be able to return the argb case fans if your luck is not on your side. The higher the number of years in warranty, the more you should prioritize buying it.

New
SJYDQ MF120 White Edition Case Fan 120mm Dual Loop 5V Addressable RGB Lighting CPU Cooling PWM Fan Silent
  • COOLER TYPE:Case Fan.
  • FAN BEARING TYPE:Rifle Bearing.
  • 24 Individually Controlled ARGB LEDs Divided Into 2 Rings Ensuring the Most Vibrant Display of Color for Your build.
  • A Mixture of Noise Reduction Technology and Sound Absorbing Materials Offering Peaceful Cooling Solution Even When Under Load.
  • Air Balance Fan Blade Combined with Shape Blades, Inspired by Jet Engine and Helicopter Blade Gives Your System Static Air Pressure Without Compromising Airflow.
New
PCCOOLER PWM Fan Hub, Addressable 5V 3Pin ARGB & 12V 4Pin PWM 2-in-1 RGB Case Fan Hub with Hidden Magnetic Base and SATA Power 16 Port, Support 8 Computer CPU Fans Splitter
  • 【ARGB & PWM 2 in 1 Fan Hub】Each port of the PCCOOLER fan hub splitter has its own PWM function that simultaneously adjusts the fan speed, allowing users to optimize the cooling capacity within the extended computer case. Support ARGB fans, ARGB light bars, etc., and synchronize the light effect of 5V 3Pin interface devices. (Note: +12V 4Pin RGB interface devices are not supported! Do not plug in!)
  • 【Widely Compatible】The fan hub splitter supports up to 8 fans, including a total of 8 4-pin PWM ports and 8 ARGB ports for ARGB fans and ARGB LED strips. The installation method is convenient and the installation is more efficient.4-Pin PWM ports supports both 3-Pin and 4-Pin fans, if 3-Pin fans are connected to this fan hub, this fan hub cannot give them extra PWM function.
  • 【Magnetic Backplane Design】The PCOOLER 1 to 10 fan hub adopts super magnetic design, which can be attached to the metal surface of the pc case and can be placed at will, without the need to use double-sided tape to fix the chassis, which is more simple and convenient.
  • 【Stable SATA Power Input】Fans are powered directly from your power supply via Sata Power, supporting up to 9 fans to prevent stray currents when using a fan hub. No voltage loss at fan speed and for smoother and more efficient operation.
  • 【Small and Exquisite Size】The small and exquisite shape saves more space and makes the internal wiring of your case more free and tidy.
New
ID-COOLING TF-12025-ARGB-TRIO Snow 120mm Case Fan 3 Pack ARGB Fans 5V 3-PIN Connector MB Sync Internal Fans Cable Management Silent Fan PWM Fan for CPU Cooler/Radiator/PC Chassis
  • 【PWM fan】The PWM fan control allows for dynamic speed adjustment between 500 rpm to 1, 500 rpm, minimizing noise or maximizing airflow. Max. Air Flow: 68.2CFM
  • 【Sync with MB】The RGB lighting can sync with the motherboard via a 5V 3PIN connector.
  • 【Compatibility】The standard 120X120X25mm cooling fan is designed to match the CPU cooler, CPU water cooler, pc case, etc.
  • 【Superior Build Quality】High quality fan blades and frame built-in extremely even light diffuser. The 120mm fan Blade is engineered for Low-Noise operation without sacrificing performance
  • 【RGB Lighting】RGB lighting is adjustable to create vibrant lighting and visual effects to match your PC build.
New
ARGB Controller, PWM、ARGB Two in one case Fan hub, 8 x 5 V3 pin ARGB HUB, 8 x 4pin Fan Ports, with 21 Key Remote Control Button, Support SATA Ports
  • 【Remote Control】The two-in-one controller is equipped with a remote control, motherboard sync cable and temperature control cable. If the motherboard does not support synchronization, you can use the remote control without connecting the synchronization cable, with a direct power interface output, which is more expressive and efficient.
  • 【RGB Light】The hub features the motherboard RGB synchronization function (for light strips), PWM function and fan power, and supports synchronous motherboard control and remote control of lighting effects. 1 to 8 fan multiports for SATA hub power 12V 4-pin PWM ARGB addressable splitter for PC LED light cooler control adapter.
  • 【Multifunction Two in One Port】8 ARGB ports (5V 3pin), 8 fan ports (4pin) PWM function, 1x3pin lighting 5V ARGB motherboard sync, 1 motherboard temperature control port for SATA power supply, and the remote control button is 21 buttons.
  • 【Cable Configuration】The PWM ARGB Hub is equipped with two connection cables, both of which are 40-60cm long. The red connector on the hub needs to be connected to the temperature control fan. The gold-plated pin is sturdy and durable.
  • 【Customer Service】If you have any quality problems with our ARGB and PWM hubs in the field, you can contact customer service in time. We provide free replacement or refund services for orders within six months within 24 hours. Please don't hesitate to buy.
New
Kidozz 120mm ARGB LED Fan Computer Case PC Cooling Fan 4 Pin PWM Fan Quiet High Airflow Computer Fan for PC Cases, CPU
  • 【Compatibility】The standard 120X120X25mm cooling fan is designed to match the cpu cooler, cpu water cooler, pc case etc.
  • 【PWM fan】The PWM fan control allows for dynamic speed adjustment between 900 rpm to 2000 rpm, minimizing noise or maximizing airflow. Max. Air Flow: 55.2CFM; Noise: 16.3~33.5dB(A)
  • 【RGB Lighting】RGB lighting can sync with motherboard is adjustable to match your PC build.
  • 【Superior Build Quality】High quality fan blades and frame built-in extremely even light diffuser. The 120mm fan Blade engineered for Low-Noise operation without sacrificing performance
  • 【Easy Installation】Standard 5V 3pin Addressable RGB header to Motherboard ARGB header
New
Kidozz 20cm ARGB LED Fan Computer Case PC Cooling Fan 4 Pin PWM Fan Quiet High Airflow Computer Fan for PC Cases, CPU
  • 【Compatibility】The standard 200×200×25mm cooling fan is designed to match the cpu cooler, cpu water cooler, pc case etc.
  • 【PWM fan】The PWM fan control allows for dynamic speed adjustment between 800 rpm, minimizing noise or maximizing airflow. Noise: 16.3~33.5dB(A)
  • 【RGB Lighting】RGB lighting can sync with motherboard is adjustable to match your PC build.
  • 【Superior Build Quality】High quality fan blades and frame built-in extremely even light diffuser. The 200mm fan Blade engineered for Low-Noise operation without sacrificing performance
  • 【Easy Installation】Standard 5V 4pin Addressable RGB header to Motherboard ARGB header
New
Shaking Tank MK120 Halo White Edition Duo-Ring ARGB Fan, 32 Independently LEDs, Motherboard SYNC with 5V-3PIN,PWM Static Pressure Fan,Addressable Fan for PC Case…
  • 【Silent cooling technology】: Noise reduction technology and sound absorbing materials, quieter, longer life cooling solutions.
  • 【Shockproof footpad, low noise】: The front and back sides of the four legs of the MK120 chassis fan are installed with shockabsorbing rubber pads, which can effectively reduce the resonance noise between the fan and the chassis no matter whether you are blowing on the front or sucking on the back
  • 【PWM fan control】: Dynamic speed adjustment between 800 RPM and 1800 RPM to reduce noise and provide maximum airflow
  • 【Double-loop addressable RGB lighting 】:32 individually controlled ARGB leds provide stunning visual effects.
  • 【Performance Engineering】 :9 aerodynamic bionic fan blades provide powerful heat dissipation for your PC case while promoting overall airflow circulation
New
for A14025-10CB-3BN-F1 DC12V 0.14A 14CM Cooling Fan
  • Model: A14025-10CB-3BN-F1
  • Size: 140×140×25mm
  • Voltage: DC12V
    Current: 0.14A
  • If you have any questions or do not understand, please email us and we will serve you wholeheartedly
  • Made in China
New
BitFenix Spectre Pro RGB (4 pin 12V) LED 140mm Case Fan with Controller 6 Packs
  • Compatible With 4pin 12V AURA SYNC, Mystic Light SYNC, RGB Fusion Ready, Polychrome SYNC
  • Dimensions (mm) 140x140x25mm
  • Current (A) 0.45A±10%
  • Speed (RPM) 1200 RPM ±10%
  • Air Flow (CFM) 86.73 CFM ±10%
New
Longzhuo 3Pcs Cooling Fans ARGB Controller 11 Fan Blades Silent Computer Air Cooler 1200rpm 12V (2#)
  • The cooling fan has 11 blades, the speed can be 1200rpm, the air volume is large, and the heat dissipation effect is good.
  • Made of high‑quality thick material, and the outer frame is sturdy, which can effectively protect the fan from deformation.
  • With shockproof and silent design, there will be no noise during use and will not affect the work. It is very suitable for office use.
  • The ARGB controller in the kit has multiple interfaces of different types, which is more versatile and practical, reducing wiring troubles.
  • The remote control can be used to control the fan speed, light mode and brightness, and the operation is simple.
SaleNew
Case Fan 15mm Thickness PWM Fan 5V 3 PIN Addressable RGB Fan Slim Fan for Radiator/CPU with DeepCool FH-04 Fan Hub
  • PWM Fan-The PWM fan control allows for dynamic speed adjustment between 500 rpm to 2, 000 rpm, minimizing noise or maximizing airflow. Max. Air Flow: 54.6CFM; Noise: 13.8~31.2dB(A) 【RGB Sync】The Addressable RGB lighting can sync with the motherboard with a 5V 3PIN connector.
  • 15mm thickness-The RGB case fan is ideal for low-profile CPU coolers, HTPCs, ITX builds, space-restricted applications with 15mm thickness to save more space.
  • Compatibility-The standard 120X120X15mm cooling fan is designed to match the CPU cooler, CPU water cooler, pc case, etc..
  • PWM FUNCTION DESIGN-FH-04 enables users to greatly expand cooling capability within the chassis and enjoy enhanced system performance. FH-04 is able to extend up to 4 fans and compatible with 3-pin/4-pin Fans.
  • PWM FUNCTION DESIGN-Each port has its own PWM function and the fan speed can be adjusted at the same time, but only the speed of Fan 1 can be identified by the system.
New
ARGB Hub PWM Fan Controller 5V External Supply 8 Way Connectors, for Computer Accessories Synchronous Lighting Effects
  • L interface: PWM signal and ARGB signal input
  • interface: 12V , sufficient supply. cable direct output: cable direct output, simpler efficient, 10 sets of PWM fans the , which can also maintain stable performance output conditions , ensuring safety.
  • ARGB interface: 8 output +5V ARGB light effect signal
  • PWM interface: 8 support PWM speed control, F 1 interface (white) provides RPM information, so please connect F1 first
  • 8 groups of PWM supply + 5V 3 Pin ARGB interface, SUPPORT synchronous lighting effects and PWM speed control
New
EZDIY-FAB Moonlight 120mm RGB PWM Case Fan with RGB PWM Fan Hub,5V Motherboard Sync,ARGB Computer Fan,Multiple Light Modes-5 Pack
  • Astonishing lighting effects-Tri-aperture inside and outside luminous light effect,Give out an impact visual light effect.
  • Self-lubricated Bearing and friction-reduced substance lowers operation noise and enhance thermal efficiency
  • Equipped with 8 anti-vibration rubber pads to effectively prevent vibration during operation, greatly reducing noise and improving efficiency.
  • With 5V ARGB control- Fan colors can be set through the main board software controller, or RESET button control can be selected to connect, and flexible and changeable lighting effects such as rainbow, flashing, monochrome, breathing can be selected, Sync with 5V RGB enabled motherboards to customize lighting effect
  • PWM Speed Control-supports automatic speed control, at 400~1600RPM
New
Chassis Fan Hub 10 Ports PWM Addressable RGB Fan Splitter 5V/3Pin for SATA Power Supply + Motherboard Control, 4 Magnetic BackPlane, Black
  • 【High Performance】Supports PWM temperature control and speed regulation, and can be connected to the fan 3pin/5v Fan interface and improving efficiency.
  • 【Manages Multiple Fans】 If your motherboard lacks fan interfaces, our PWM fan hub is the neat and tidy way to expand. The 5V fan controller accurately controls 3-pin fan speed from a single case input.
  • 【Save Space】The black hub is perfectly integrated with chassis. Mini and compact, which effectively saves your space, makes cable management easier, and the inside of the chassis is tidy. The adhesive on the back can be used to fix the hub in the chassis, tool-free installation, and not easy to drop.
  • 【Synchronization Function】For SATA Power Supply + Motherboard Control and Remote ControlThe hub has a motherboard RGB synchronization function (for light bars), PWM function and fan power. Support synchronous mainboard control and remote control of lighting effects.
  • 【Easy Installation】 4 Magnetic can be adsorbed on the iron metal surface of the chassis , standoff design for easily fixing the hub in the chassis.
New
Case Fan Hub SC790 ARGB and PWM HUB, 6 Ports 4Pin PWM Fan Hub, Magnetic backplane Design, SATA Power, Black
  • 【Function】The SC790 2-in-1 PWM&RGB hub uses only two ports on the motherboard to simultaneously control the speed and lighting of up to six PWM ARGB fans.
  • 【Performance】The PWM & ARGB split-Hub -SC790 can access the 3-pin 5V ARGB interface and 4-pin PWM interface on the motherboard, and expand up to 6 PWM ARGB fans to achieve divine light synchronization. The attached SATA wire provides a stable and continuous power supply for all your lighting equipment.
  • 【Highlights Design】The compact and robust case is magnetically attractive and can be easily attached to any other plane position of the chassis iron plate.
  • 【Compatibility】Suitable for 5V 3Pin Asus Sync, MSI, Mystic Light sync, Gigabyte RGB Fusion, SATA Powered.
  • 【Note】This product is not compatible with 12V 4-Pin RGB equipment.

argb case fans: Frequently Asked Questions

Apart from everything about argb case fans, the FAQ section will be really handy for you. As many buyers like you have asked these questions that you currently have in mind. So let’s check them out!

Is buying a argb case fans worth it?

At the end of the day, it’s your money. If you need it then sure, why not? On the other hand, if you know that you wouldn’t be able to utilize it then don’t bother.

Does the brand value matters when it comes to argb case fans?

Brand value has always been a way to identify quality. Buying a well-branded argb case fans is like buying reliability. With popular brands, you can be assured that the argb case fans you received will serve as promised.

How long will argb case fans last?

There’s no definite way of telling how long your purchase will serve you since it completely depends on how you use it. Other than the factors and the environment that a argb case fans is used in, quality also plays a role in durability.

Wrapping Up!

We have, at long last, identified a remedy for the issue you've been having in terms of locating a quality item. It's possible that at this point you're wondering why you should bother spending so much time reading this proposal about the best argb case fans.

You have to put in a lot of effort to earn your money, therefore analyzing these characteristics may seem like a burden. Check to see that your money is being applied to the appropriate things and not merely flushed down the toilet. Therefore, you should make sure that you are not throwing away your money and pick the appropriate item.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *